Damp-Proof Injection Kit 3000 Pro
A professional damp proofing kit with sufficient DPC injection treatment for up to 150m of single leaf wall or 75m of nine inch solid wall
Damp-Cure cream, which is a 100% active silane / siloxane injection treatment formulated to ensure rapid and maximum penetration into damp walls.
Solid walls can be drilled and injected from the most convenient side. The inner and outer skins of a cavity wall should be treated independently of each other, drilling and injecting the both sides of the wall to form a chemical DPC in each. Renew damp plaster to complete the damp proofing treatment.
Drill a series of 12mm holes, 90% though the wall at 100-120mm centres along the designated bed joint. Inject enough cream to fill the hole to within 1cm of wall surface and leave it to migrate through the wall and cure to form a chemical damp proof course. Make good with sand and cement whist cream is in the hole or with mastic if filling after diffusion
Damp Injection Kit includes:
- 5 x 3000ml Damp-Cure DPC cream
- 1 x 12mm x 160mm Professional SDS drill bit
- 1 x 12mm x 260mm Professional SDS drill bit
- 1 x Pump-up pressure vessel and injection nozzle
- 1 x Pair of protective gloves
Consumption rate - 115mm wall* 30m per pail
Consumption rate - 230mm wall* 15m per pail
*Approximation only - allows 5-10% wastage
There are no reviews yet.
- RRP €33.91
- RRP €183.52